FUXTEC FX-PS152 User Manual

Original User Manual FUXTEC FX-PS152 / FX-PS162
18
9. Cold start of the engine
1. Place the device on a firm and flat surface.
Slide the engine stop switch forward to position 1.
2. Move the choke lever upwards to "COLD START."
3. Press the carburetor pump about 8-10 times (until gasoline flows in the line)
4. Pull out the starter rope with a short-stroke until resistance is felt
(about 100mm). A continuous, mainly fast train will provide a strong spark, and the engine
will respond after 2-3 trains.
5. Necessary: Set the choke lever to the "WARM START" position after the engine has
responded and immediately pull the starter again until the engine starts. '' see also video
device start on our homepage.''
6. Let the engine warm-up at idle for about 10 minutes
3
4
5
1 0

FUXTEC FX-PS152 Specifications

General

Type	String trimmer
Head type	Nylon line
Handle type	U-type handle
Engine power	3 hp
Product color	Black, Orange
Rotational speed	7100 RPM
Number of strokes	2
Fuel tank capacity	1.2 L
Vibration emission	9.661 m/s²
Automatic line feed	Yes
Engine displacement	52 cm³
Sound pressure level	99.5 dB
Cutting diameter (max)	440 mm
Sound power level guaranteed	113 dB
Sound power level uncertainty	3 dB
Power source	Gasoline

Weight and Dimensions

Weight	7500 g