Original-Bedienungsanleitung FUXTEC Benzin-Rasenmäher FX-RM5170 / RM5170eS
48
Working with the mower
Starting/stopping the engine
When cold starting, first press the primer pump before tightening the throttle grip on the upper spar.
Important note: not every model is equipped with a primer pump.
To start the engine, tighten the handle for the engine cable to the handle of the upper spar.
If your model has rear-wheel drive, you should not hold the handle for the rear-wheel drive during
the starting process. Otherwise, the rear wheels will start moving immediately.
Then pull carefully on the handle of the starter cable until you feel a slight resistance. Now pull the
starter rope with momentum to start the engine. With a cold start, you may need 2-3 attempts until
the engine runs.
To Next Page
Loading...
Need help?
General
