14
Chain drive
Installation and Operating instructions
ELTRAL KS30/40 RADIO CONTROL
11 Components and accessories
ELTRAL KS 30/40 RADIO CONTROL chain drive
ELTRAL KS 30/40 RADIO CONTROL K-19042-00-0-*
* = colour: 1 = grey (RAL 7047), 6 = black (RAL 9005), 7 = white (RAL 9016)
Accessories for ELTRAL KS 30/40 RADIO CONTROL chain drive
(see section "17 Application examples" on page 17)
Handheld radio transmitter K-19046-00-0-0
Chain holder for top hung sash 9-44272-00-0-*
Narrow chain holding fi xture set K-17441-00-0-*
Pivot bracket set K-17440-00-0-*
Bracket set for sash mounting K-17720-00-0-8
Testing and setting apparatus K-17736-00-0-0
* = colour: 1 = grey (RAL 7047), 6 = black (RAL 9005), 7 = white (RAL 9016)
Security stay Euro-Solid
Catch-stay for aluminium or timber windows without lateral locking point K-17915-00-0-8
Catch-stay for aluminium or timber windows without lateral locking point K-17915-01-0-8
Catch-stay for timber windows with lateral locking point K-18046-00-0-8
For installation see application diagram
Profi le-related packing shims may be required when installing the safety stays
see order catalogue.
Fastening kits vary depending on installation method, profi le system, and profi le
material.
12 Maintenance and care
To ensure problem-free operation, you must perform the following work every 1000 opening
cycles, and at least once a year:
Check all screws for tight fi t and retighten where necessary.
Check the window sash fi ts correctly in the frame. Readjust the fi xing set if necessary.
Check all parts for damage and wear. Replace them where necessary.
Never use alkaline or acidic cleaning detergents. Do not immerse the device in water.
Do not try to repair a defective drive by yourself. Never remove the housing or other
components. In case of signs of damage to the device contact the manufacturer. Only
use spare parts supplied by the manufacturer to carry out repairs.