Why is the power indicator not lighting up on my Gainscha Label Maker?
If the power indicator on your Gainscha Label Maker is not illuminating, it is likely that the power cord is not properly connected. Plug the power cord into both the printer and the outlet, and then switch the printer on.
What causes irregular printing on Gainscha Label Maker?
Irregular printing on your Gainscha Label Maker indicates that the printer may be in Hex Dump mode. Turn the printer off and then on again to exit the dump mode.
General| Brand | Gainscha |
|---|---|
| Model | GS-2406T Series |
| Category | Label Maker |
| Language | English |
Introduces the Gainscha bar code label printer and its capabilities.
Details the standard and optional features of the GS-2406T/GS-3405T series printers.
Guides users on inspecting the printer and its accessories upon delivery.
Provides visual identification of printer components.
Step-by-step instructions for initial printer connection and power-on.
Detailed guide on installing the necessary software driver for the printer.
Instructions for correctly installing the thermal transfer ribbon.
Steps for loading various types of print media and labels.
Procedure for installing the optional cutter accessory.
Steps for installing the optional peeler accessory.
Explains the status indicated by different LED lights on the printer.
Describes the operation of the Feed and Pause buttons.
Details special functions accessible during printer startup.
Instructions on launching and navigating the printer utility software.
How to configure printer settings and functions via the utility.
Lists common issues and their solutions for printer operation.
To Next Page
