Why is my Gainscha Label Maker printing irregularly?
If your Gainscha Label Maker is printing irregularly, it may be in Hex Dump mode. Turn the printer off and then on again to exit dump mode.
Why is my Gainscha GS-2408DC not printing anything on the label?
If your Gainscha Label Maker is producing labels with no print, the label may not be loaded correctly. Follow the instructions for loading the media properly.
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Processor | 32-bit RISC CPU |
| Print Speed | 150 mm/s |
| Max. Print Width | 108 mm |
| Media Type | Die-cut |
| Media Width | 25.4 mm |
| Media Thickness | 0.06 mm - 0.25 mm |
| Media Roll Diameter | Max. 127 mm |
| Memory | 8 MB Flash |
| Interface | USB, RS-232 |
| Power Supply | AC 100-240V, 50-60Hz |
| Max. Print Length | 1778 mm (70") |
Overview of Gainscha bar code printer series, applications, and features.
Details the standard features of the GS-2408D/GS-3405D printer models.
Guides users through inspecting the printer and its included components after unpacking.
Provides detailed views and labels for the printer's top, interior, front, and rear.
Step-by-step instructions for physically setting up the printer and connecting it.
Detailed guide on installing the necessary printer driver software on a computer.
Instructions on how to properly load roll labels into the printer.
Explains the meaning of the LED lights on the printer for different operational states.
Describes the functions of the FEED and PAUSE buttons in various printer modes.
Details special functions accessed by pressing buttons during power-on for testing and configuration.
Introduces the Printer Utility software and how to launch it.
Explains how to use the Printer Utility to configure printer settings and functions.
Lists common issues with their possible causes and recovery procedures.
To Next Page
