GALBIATI PRIMA - DISTILLED WATER FILLING (Automatic Suction); Add Distilled Water by Automatic Suction

DISTILLED WATER FILLING
10
STEP 1:
Take the water tube
given with PRIMA.
STEP 2:
› Open the door.
› Connect the water tube to the “Distilled water in”
connector in the middle by entry connector.
› Put the other end of the tube in a tank with distilled water.
STEP 3:
STEP 4:
1- PUSH
2- PULL
STEP 5:
Water add by automatic suction has a length of 4
minutes, press again START button if you want to
interrupt automatic suction.
After adding water by automatic suction, remove the tube
from “Distilled water in” connector lightly pressing on
the top of connector and then take off the water tube.
B. ADD BY AUTOMATIC SUCTION:
Press 4 times TEST button until the indicator
«automatic water add» brightens
Then press START button to go on.