16
4. Autoclave provides two methods to
save the data of sterilization cycle:
A. Through PRINTED REPORT:
A the end of the cycle please pull
the printed report out from the printer.
B. Through DIGITAL REPORT:
- Remove the USB from its port
and connect the USB in the pc so
you can download the digital report.
If the writing “ERROR+ Code” displays on
the screen so it means the sterilization
cycle has been a negative ending.
Please read the user manual
and check the error code.
(See page 38, Appendix 4).
AT THE END OF THE STERILIZATION PROCESS
To Next Page
Loading...