To Next PageTo Next PageWhy doesn't my Galcon DC-4S Controller valve open in auto or manual mode?
If the valve on your Galcon Controller isn't opening in either automatic or manual mode, there could be a connection issue between the controller and the solenoid. Try disconnecting and reassembling the solenoid. Alternatively, the batteries might be dead. In this case, replace them.
What to do if Galcon Controller valve stays open in AUTO?
If the valve remains open on your Galcon Controller even when the lever is in the AUTO position, the solenoid may be open. To resolve this, connect the controller to the valve, insert batteries, and then manually close and open the valve using the controller.
How to fix a Galcon DC-4S valve that won't close after hearing a click?
If you hear a click but the valve on your Galcon Controller doesn't close, first ensure that the valve lever is in the AUTO position. If it is, the issue might be dirt or scale in the valve mechanism. Try cleaning or replacing the valve to resolve this.
How to fix a Galcon DC-4S Controller with no display?
If your Galcon Controller has no display, the batteries might not be working. Replace the batteries to see if this resolves the issue.
General| Brand | Galcon |
|---|---|
| Model | DC-4S |
| Category | Controller |
| Language | English |
Instructions for attaching the controller to the solenoid adapter.
Instructions for mounting the controller on a wall.
Steps to set the current time and day of the week on the controller.
Steps to select a valve for programming on DC-1 model.
How to set the length of time the valve stays open.
How to choose specific days of the week for irrigation.
Setting specific opening times and intervals for cyclical/one-time programs.
A practical example for setting up a cyclical irrigation schedule.
