Galcon DC-4S - Programming Modes and Valve Selection; Valve Selection for Programming

3.2 Switching between AM/PM
and 24 Hour Time Format
The default time format is AM/PM. There is
also a 24 hour time format. To switch
between the two formats:
1. Press
until the appears.
2. Press The hour digits blink.
3. Press
and simultaneously. The
clock
reading switches from AM/PM to a 24
hour time display or vice versa.
You can switch the time display
format at any step in the
programming process.
3.3 Valve Selection
This section does not apply to the
DC-1 model.
Program an irrigation schedule for each valve
individually. First select the desired valve, and
then program a schedule as follows:
1. Press
until appears.
2. Press
. A blinking arrow appears at the
bottom of the display.
3. Move the arrow to the desired valve number
by pressing
or .
4. Press
to proceed to the next step.
8