Need help?Do you have a question about the Galcon G.S.I DC and is the answer not in the manual?
General| Brand | Galcon |
|---|---|
| Model | G.S.I DC |
| Category | Controller |
| Language | English |
Describes the two models of the G.S.I Controller based on power supply.
Details the physical installation of the controller on a wall or pole.
Provides step-by-step instructions for mounting the controller in a cupboard or on a wall.
Instructions for mounting the controller onto a pole using mounting bands.
Explains the controller's output connectors and input devices.
Guides on connecting solenoid wires and master valve wires to the controller.
Steps for installing or replacing the internal batteries of the controller.
Details on connecting external input devices like sensors and meters.
Information on locating and inserting the SIM card into the controller.
Explains the information displayed on the controller's main screen.
Procedure for establishing wireless communication between the controller and the server.
Instructions for manually setting the controller's internal clock.
Guides on performing operational tests for each irrigation station.
Procedures to test the fertilizer function and the controller's master valve output.
Introduction to creating irrigation programs directly on the controller.
How to define the run time for each irrigation station.
Configuring irrigation programs for one-time or recurring cycles.
Defining the specific day and time for an irrigation program to begin.
Steps to disable or cancel a scheduled irrigation program.
How to manually start irrigation for a specific station.
Procedure for resetting the controller to its default state.
Instructions on how to pause and resume irrigation cycles.
Explains fault messages displayed by the controller and how to clear them.
Method to lock or unlock the controller's user interface to prevent changes.
To Next Page
