3.6 Setting Irrigation Start Times
In this step, up to 4 separate irrigation start
times can be programmed for a selected day
for the valve being programmed. The selected
valve will open at each of the start times set,
for the irrigation duration set as described in
Section 3.4.
1. Press until the START I appears.
The word OFF or the last start time set
will appear on the display.
2. Press . The displayed item blinks
(
or last start time entered).
3. Set the desired start time by pressing
or . (Take note of the AM and
PM designations). Repeat actions 2 and
3 to set start times II, III and IV, as needed.
4. To cancel a specific start time, select it by
pressing
. Next, press . The hour
digits blink. Press
or until the word
appears on the display.
5. To program another valve, select it, and
repeat the above steps, starting from
section 3.3 above.
10
To Next Page
Loading...
Need help?
General
