What does it mean if the red fault LED is on with 5 flashes on my Gallagher Scanner?
If the red fault LED is flashing 5 times, this indicates the remote control is not working due to a PCB issue. Replace the PCB. Contact your Gallagher representative for advice on how to repair this issue.
What does it mean if the red fault LED is on with 6 flashes on my Gallagher Scanner?
If the red fault LED is flashing 6 times, this indicates a solenoid short on the 12V rail. Contact your Gallagher representative for advice on how to repair this issue.
What does it mean if the red fault LED is on with 7 flashes on my Gallagher Scanner?
If the red fault LED is flashing 7 times, this indicates a short on the 5V loopback rail. Check for dirt or water in the indicator cable or loopback connector, if they are clean and dry and the fault persists, contact your Gallagher representative for advice on how to repair this issue.
What does it mean if the red fault LED is on with 10 flashes on my Gallagher HR3?
If the red fault LED is flashing 10 times, this indicates that the unit is unable to identify the cause of the fault. Contact your Gallagher representative for advice on how to repair this issue.
Defines the Sheep Auto Drafter, its components, and operational capabilities for sheep handling.
Details on the electrical supply needed for the unit's operation, including voltage and adapter use.
Information on the air supply needed for the unit's operation, including pressure gauge readings.
How to operate the unit in automatic mode for weighing and drafting based on scale indicator settings.
How to operate the unit in manual mode, controlling animal release and direction with the remote.
Instructions for using the E-Stop button in emergency situations to halt the unit and remove air pressure.
Guide to checking LED indicators on the control bridge for fault diagnosis and status.
How to trigger and interpret fault codes indicated by flashing LEDs for troubleshooting.
A list of common issues and their corresponding solutions for the Sheep Auto Drafter.
To Next Page
General