Gallo Tech GStarter I - User Manual

© Copyright
Gallo Technologies
. All Right Reserved
-
1
-
52008
Operation & Installation
Manual for:
Push Button Start & Alarm System
With 2 Remote Key FOBs
DISCLAIMER:
This installation manual is designed for the installer or individual with an existing understanding of automotive
electrical systems
, along with the ability to test and connect wires for proper operation.
Some soldering is required.
To ease installation, we suggest that you READ THIS MANUAL before beginning your installation. This manual is
provided as a GENERAL GUIDELINE and the infor
mation contained herein may differ from your vehicle
.
Gallo
Technologies and
its’ vendors shall not be liable for any accident resulting from the use of this product. This system
is designed to be professionally installed into a vehicle in which all system
s and associated components are in
perfect working condition.
DAMAGE to the
unit
resulting from incorrect installation or failure to follow
guidelines stated in this manual will not be covered under warranty and will be subject to repair or replacement
c
harges.
If you feel after reading the instructions, that you are not adequately skilled to install this product safely
please have it professionally installed. Links to nation
-
wide Audio and Alarm installers can be found on our web site
at
www.GalloTech.com
.
Table
of
Contents
1.1
Introduction
1.2
Remote Key FOB Operation
1.3
Function Options
1.4
Programming Function Set Up Options
1.5
Installation Instructions
1.6 Final Installation
1.7 Troubleshooting
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference
received, including
interference that may cause undesired operation.
www
.GalloTech.com

Gallo Tech GStarter I Specifications

General

Brand	Gallo Tech
Model	GStarter I
Category	Remote Starter
Language	English