EN
15
4. Remain still and do not talk or move during the measurement.
WARNING: If the cuff is relatively lower (higher) than the heart, the obtained
blood pressure value could be higher (lower) than the actual value. Always apply
the pressure cuff before turning on the monitor.
1. Fasten the wrist cuff according to the instructions in “ATTACHING THE
WRIST CUFF.”
2. Press the “ON/OFF” button. All icons appear two seconds on DISPLAY, then
switch to measurement, and display “0” or last measurement record.
3. Will ash on LCD. When complete, the results will be displayed.
To Next Page
Loading...
