17
EN
To prolong the batteries’ life the device switches off automatically if no
button is pressed for 1 minute. Otherwise you can switch it off by pressing
the or button.
+PFRHSEPSLPSQ(2(%K2FLJK3KSE(
If it is necessary to interrupt a blood pressure measurement for any reason
(e.g the patient feels unwell), the or button can be pressed at any
time. The device then immediately lowers the cuff pressure automatically.
%.%$-:(5"0'#&$0
1. Under power off. Hold or for 3 seconds , get into relative memory
mode, it reads the average of latest 3 measurements, press “SET” to nd
more memory.
2. Press or tо cut off the power.
• lf forget to turn it off. Automatically power off in one minute.
• More than 90 measurements, it will deletes the earliest one automatically
• The stored memory will not lose after replacing battery.
3. Delete memory (all the memory will be deleted) Showing
memory, hold or for 5 seconds, display « » means all
the memories have been deleted.
To Next Page
Loading...
