Need help?Do you have a question about the GAOMON GA3 and is the answer not in the manual?
Connect the light pad to a computer or power adapter using the Micro USB cable.
Use the power button to turn the light pad on/off and adjust brightness by holding it.
General| Active Area | 10 x 6.25 inches |
|---|---|
| Pressure Sensitivity | 8192 levels |
| Report Rate | 266 RPS |
| Resolution | 5080 LPI |
| Connection | USB |
| Pen Type | Battery-free Pen |
| Technology | Electromagnetic Resonance |
| Reading Height | 10 mm |
| Compatibility | Windows, macOS |
| Pen Technology | Passive Electromagnetic Resonance |
To Next Page
