There should be four open holes between the carabiners and the carabiners
should align with the pulley marks.
Installing the power adapter
1. Plug one end of the DC cable into a lifter.
2. Install the power adapters anywhere on the Smart Track.
NOTICE
The universal mounting bracket attached to the bottom of the power adapters lets you
easily slide and snap them into place in any open area on the track. Slide the bracket
until you feel it snap into the Smart Track holes. The universal mounting bracket is
removable so you can remove the power adapter from the bracket if you need to.
To Next Page
Loading...
Need help?
General
