Garage Smart Hard Top Lifter User Manual

Part I: Assemble the Hard Top Lifter
Frame
Assemble the Hard Top Lifter frame on the garage floor in the area where you want to
lift your vehicle's hard top. To begin, put together the two identical Length Adjuster
Assemblies using parts A and B.
1. Insert the Narrow Length Adjuster (A) into the Wide Length Adjuster (B) with the
rectangular slot at opposite ends.
l For a 4-door JL hard top, extend the length of the assembly so that 7 holes of
part A are exposed from part B.
l For a 2-door hard top, extend the length of the assembly so that 13 holes of part
A are exposed from part B.
l For a 4-door JK hard top, extend the length of the assembly so that 5 holes of
part A are exposed from part B.

Garage Smart Hard Top Lifter Specifications

General

Brand	Garage Smart
Model	Hard Top Lifter
Category	Lifting Systems
Language	English