GARDASOFT RT Series - Page 42

RTxxx LEDlighting controllers - User Manual
Follow the keystrokes below toenter numerical data into the RT200 using
the above scheme:
E-2
is displayed. Press the
SEL
button to enter time values from
10ms to 5s.
Use the p and q buttons to select
the required value in steps of 10ms.
Press the
SEL
button.
E-3
is displayed. Press the
SEL
button to enter time values from 1ms
to 999ms.
Use the p and q buttons to select
the required value in steps of 1ms.
Press the
SEL
button.
E-4
is displayed. Press the
SEL
button to enter time values from
0.1ms to 99.9ms.
— 42 —
WWW.STEMMER-IMAGING.COM