GARDASOFT RT Series - Viewing the Trigger Status; Viewing the Output Current

RTxxx LEDlighting controllers - User Manual
9.10 Viewing the trigger status
You can view the trigger input status and whether the light is pulsing when
the RT200 is set to pulse mode. To do this, press the SELbutton for one
second and
CH1 is displayed. Use the p and q buttons to select trg
and press SEL. The display shown below appears:
9.11 Viewing the output current
You can view an approximate measure of the output current from the
RT200 front panel. The current measurement is updated roughly once per
second, but this can be slower when the RT200 is set to pulsed operation.
To view the output current, press the SEL button for one second and
CH1
is displayed. Follow the keystrokes below:
Use the
p
and
q
buttons to select
UAL
and
press the
SEL
button.
— 47 —
RTxxx LEDlighting controllers - User Manual
Un
is displayed. Press the
SEL
button.
Use the p and q buttons to enter the lock
code and press the
SEL
button.
CH1 is displayed and the RT200 keypad is
unlocked.
If the code entered is incorrect, LOC is
displayed.
— 46 —
WWW.STEMMER-IMAGING.COM