GARDASOFT RT Series - Setting up Pulsed Operation

RTxxx LEDlighting controllers - User Manual
To set the error detection, press the
SEL
button
with
F E
displayed.
Or...
If you wish todisable the error detection, use
the
p
and
q
buttons to select
F-E
, and press
the
SEL
button.
Selected output is set up on the RT200.
9.6 Setting up pulsed operation
Pulsed operation allows you toset up the characteristics of the lighting
pulse irrespective of the trigger pulse duration. Press and hold SELfor one
second ,
CH1 is displayed. Use the p and q buttons to select the channel
you want to set up, and follow the keystrokes below:
The channel you want to set up is displayed.
Press the
SEL
button.
Use the
p
and
q
buttons to select
SPu
and
press the
SEL
button.
— 38 —
WWW.STEMMER-IMAGING.COM