RTxxx LEDlighting controllers - User Manual
Use the
p
and
q
buttons to select
LOC
, and
press the
SEL
button.
To set up the lock code, use the p and q
buttons to select
Lc
. Press the
SEL
button.
0
is displayed. Use the
p
and
q
buttons to set
a lock code value from 0 to 255, and press the
SEL
button.
The RT200 keypad is locked.
To unlock the keypad, press and hold SELfor one second and follow the
keystrokes below:
LOC
is displayed. Keep pressing the
SEL
button.
— 45 —
RTxxx LEDlighting controllers - User Manual
Ensure the RT200 is set to pulsed operation. To set the period of the
internal trigger, press and hold SELfor one second and follow the
keystrokes below:
Use the
p
and
q
buttons to select
FrE
and
press the
SEL
button.
OFF
is displayed. Press the
SEL
button to end
the sequence.
Or...
Use the
p
and
q
buttons to select
On
and
press the
SEL
button.
The internal trigger is running with the
parameters set up in Section 9.6, Setting up
pulsed operation.
9.9 Using the key lock
You can lock the RT200 front panel keypad so that unauthorised users
cannot change the configuration. To do this you can set a numeric code
from 0 to 255, which provides moderate protection.
To lock the keypad, press and hold SEL for one second.
CH1 is displayed.
Follow the keystrokesbelow:
— 44 —
To Next Page
Loading...
