Gardena T 1030 D - Page 10

28
EN
1. Turn the control knob to Off and confirm by pressing the
OK button.
The program stored in the memory is overwritten.
The
Time LED flashes.
Setting the current time:
2. Set the current time on the inner black scale by turning
the control knob and confirm the time you have selected by
pressing the OK button (e.g.: 10:00 am).
The Time LED lights up for half a second and the current
time is entered to the nearest hour.
The
Day LED flashes.
Setting the current day:
3. Set the current day on the outer grey scale by turning the
control knob and confirm the day you have selected by
pressing the OK button (e.g.: Mon Monday).
The Day LED lights up for half a second and the current day
has been stored.
The
Start Time LED flashes.
1.
2.
3.