can change the settings to meet your requirements. Please make
sure that the camera is in the SET mode. Once the camera screen
is on, press MENU key to enter/exit the menu. Press the
UP/DOWN key to move the marker, Press the LEFT/RIGHT
key to change the setting, and press the OK key to confirm the
change. Always remember to press the OK to save the change.
Otherwise you will lose your new setting.
Parameter
(Bold =
Description
Mode
Motion
Detection,
Time
Lapse
In Motion Detection mode, the camera
would take photos or videos once
triggered. In Time Lapse mode, the
camera would take photos or videos
periodically according to your preset
“Timelapse Interval” parameter.
Select whether still photos or video clips
are taken.
Photo
Quality
20MP
16MP
8MP
4MP
2MP
Select desired resolution for still photos
from 2 to 20 megapixels. Higher
resolution produces better quality
photos, but creates larger files that take
more of the SD card capacity. Larger
files require longer time to write to the
SD card, which will slightly slow the
Select the number of photos taken in
sequence per trigger in Camera mode.
Video
Quality
1080P
720P
Select video resolution (pixels per
frame). Higher resolution produces
better quality videos, but creates larger
files that take more of the SD card
To Next Page
Loading...
