or video resolution, interval between photos, switch the time
imprint on, etc. (See more in Section 8 ADVANCED
SETTINGS).
Moving the power switch to the SET position will turn on the
screen display, and you will see an information screen that
shows how many images have been taken, the battery level,
camera or video mode, etc.
Attention please: In SET mode, the camera will automatically
enter ON mode if there is no operation (key pressing) within 5
minutes. Then the camera will perform as your settings in the
menu.
In the SET mode, you can connect the camera to a computer's
USB port to download your images.
Shortcut Keys/Functions
As mentioned earlier in "Parts & Controls", the keypads have
secondary, "shortcut" functions when the camera is switched to
SET mode:
Press the UP key to quickly set the camera to shoot video
clips.
Press the DOWN key to quickly set the camera to take still
photos.
Press the RIGHT key to manually trigger the shutter. This is
useful for testing the camera. The "number of images taken"
counter on the top right of the screen will increase by one.
Press the OK key to playback. Then press UP or DOWN
key to navigate the history photo or video if you want.
Finally press the OK key to exit playback.
8. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You
To Next Page
Loading...
