Table 1 - App Navigation
Preview, manual taking pictures or
videos.
Note: When your Wi-Fi camera is
connected, motion detection will
be disabled. It will be enabled
again when you disconnect your
Wi-Fi camera or close the app for
90 seconds.
Camera status, including battery
level, total memory card capacity
and used capacity, internal
temperature of the camera, number
of pictures and videos stored on
the SD Card, camera model,
firmware version number, etc.
Display or program camera
settings, such as mode, picture
quality etc.
Review or download the pictures
or videos the camera has taken.
To Next Page
Loading...
