7. THE OFF, ON, AND SURVEILLANCE MODES
The camera has three basic operational modes:
OFF mode: Power switch in the OFF position (The
camera is powered off).
ON mode: Power switch in the ON position (The
camera is powered on and its screen is on).
SURVEILLANCE mode: When the camera is powered
on, press START button to enter the surveillance mode.
When the screen is off, the camera enters standby and
will perform according to your settings.
7.1. OFF MODE
The OFF mode is the "safe" mode when any actions must
be taken, e.g., replacing the SD card or batteries, or
transporting the device. And of course, when you are
storing or not using the camera, you will switch it to OFF.
Please note that in the OFF mode the camera will still
consume a little power. It's a good idea to take the batteries
out of the battery compartment if the camera will not be
used for a long time.
7.2. ON MODE
In the ON mode you can check and change the settings of
the camera with the help of its built-in screen. These
settings, found in the menu by pressing MENU key, let you
change the photo or video resolution, interval between
photos, switch the time imprint on, etc. (See more in
Section 8 ADVANCED SETTINGS).
On the screen display, you will see an information screen
To Next Page
Loading...
