Garmin Aera 760 User Manual

Garmin aera 760 Pilot’s Guide
190-02674-00 Rev. B
89
Flight Planning
Overview Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index
DEPARTURE PROCEDURES
A Departure Procedure (DP) is loaded at the departure airport in the flight plan.
Only one departure can be loaded at a time in a flight plan. If a departure is loaded
when another departure is already in the active flight plan, the new departure replaces
the previous departure. The route is defined by selection of a departure, the transition
waypoint, and a runway.
LOADING A DEPARTURE
Loading a departure from the active or saved flight plan:
1) With the flight plan displayed, touch Menu.
2) Touch Select Departure.
3) Confirm the intended airport is displayed or touch the Airport Button, select
the desired airport, and touch Enter.
4) Touch to select the desired departure.
5) Touch to select the desired runway.
6) Touch to select the desired transition waypoint.
7) Touch Load Departure.
Touch the Select
Departure Button
Loading a Departure Procedure
Touch to load
the departure
Touch each button to select the desired
departure, runway, and transition
waypoint

Garmin Aera 760 Specifications

General

Display Size	7 inches
Resolution	1024 x 600 pixels
Battery Life	Up to 4 hours
Connectivity	Wi-Fi, Bluetooth, USB
WAAS Receiver	Yes
Weather Support	Yes, with subscription
Voice Control	No
Display Type	Touchscreen
Preloaded Maps	Yes, worldwide
GPS Receiver	High-sensitivity receiver
Charts	Aviation charts
Data Subscription	Required for some features
Traffic Support	Yes, with subscription
Mounting Options	Suction cup, yoke mount