Garmin D2 MACH1 - Activity Alerts

Route Stats: Enables route statistics tracking for indoor
climbing activities.
Routing: Sets the preferences for calculating routes for
the activity (Routing Settings, page19).
Satellites: Sets the satellite system to use for the activity
(Satellite Settings, page19).
Scoring: Enables or disables scorekeeping automatically
when you start a round of golf. The Always Ask option
prompts you when you begin a round.
Scoring Method: Sets the scoring method to stroke play or
Stableford scoring while playing golf.
Segment Alerts: Enables prompts that alert you to
approaching segments (Segments, page22).
Self Evaluation: Sets how often you evaluate your
perceived effort for the activity (Evaluating an Activity,
page7).
SpeedPro: Enables advanced speed metrics for windsurf
activity runs.
Stat Tracking: Enables statistics tracking while playing
golf (Recording Statistics, page13).
Stroke Detect.: Enables stroke detection for pool
swimming.
Swimrun Auto Sport Change: Allows you to automatically
transition between the swim portion and the run portion
of a swimrun multisport activity.
Touch: Enables or disables the touchscreen during an
activity.
Tournament Mode: Disables features that are not allowed
during sanctioned tournaments.
Transitions: Enables transitions for multisport activities.
Vibration Alerts: Enables alerts that notify you to inhale or
exhale during a breathwork activity.
Workout Videos: Enables instructive workout animations
for a strength, cardio, yoga, or Pilates activity.
Animations are available for pre-installed workouts
and workouts downloaded from your Garmin Connect
account.
Activity Alerts
You can set alerts for each activity, which can help you
to train toward specific goals, to increase your awareness
of your environment, and to navigate to your destination.
Some alerts are available only for specific activities. There
are three types of alerts: event alerts, range alerts, and
recurring alerts.
Event alert: An event alert notifies you once. The event is
a specific value. For example, you can set the watch to
alert you when you burn a specified number of calories.
Range alert: A range alert notifies you each time the
watch is above or below a specified range of values.
For example, you can set the watch to alert you when
your heart rate is below 60beats per minute (bpm) and
over 210bpm.
Recurring alert: A recurring alert notifies you each time
the watch records a specified value or interval. For
example, you can set the watch to alert you every
30minutes.
Alert Name Alert Type Description
Cadence Range
You can set minimum and
maximum cadence values.
Calories
Event,
recurring
You can set the number of
calories.
Custom
Event,
recurring
You can select an existing
message or create a custom
message and select an alert
type.
Distance Recurring
You can set a distance
interval.
Elevation Range
You can set minimum and
maximum elevation values.
Heart Rate Range
You can set minimum and
maximum heart rate values
or select zone changes. See
About Heart Rate Zones,
page51 and Heart Rate
Zone Calculations, page52.
Pace Range
You can set minimum and
maximum pace values.
Pacing Recurring
You can set a target swim
pace.
Power Range
You can set the high or low
power level.
Proximity Event
You can set a radius from a
saved location.
Run/Walk Recurring
You can set timed walking
breaks at regular intervals.
Speed Range
You can set minimum and
maximum speed values.
Stroke Rate Range
You can set high or low
strokes per minute.
Time
Event,
recurring
You can set a time interval.
Track Timer Recurring
You can set a track time
interval in seconds.
Setting an Alert
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Alerts.
18 Activities and Apps