Garmin Edge 510 User Manual

55
CHAPTER 7: VECTOR
1. 2. 3.
1. Rotate the pedals a few times
in order to activate Vector. From
the home screen, select
.
2. Select Sensors. 3. Select
with the ID number
of your device.
Your First Ride
Before you ride with Vector for the first time, you must enter the crank length, set the installation angle
of the sensors inside the pedals, and calibrate the static zero reference. You must also calibrate the
system if you move Vector to another bike.
These procedures contain instructions for the EDGE
®
1000. If you have another compatible device, see
EDGE
®
810 and 510 Device Instructions, or go to www.garmin.com/vectorowner.
ENTERING THE CRANK LENGTH
The crank length is often printed on the crank arm.
150217_Garmin_Quickguide_BIKE_GPS_Devices_RZ.indd 55 17.02.15 16:55

Garmin Edge 510 Specifications

General

Display diagonal	- \
Display resolution	176 x 220 pixels
Product color	Black
Battery life (max)	20 h
Operating temperature (T-T)	-20 - 55 °C
Manual	Yes

Weight and Dimensions

Depth	24 mm
Width	52 mm
Height	86 mm
Weight	80 g