Getting started with an eTrex 20 29/12/2015
When you first switch on your eTrex you’ll get the Main menu screen appearing after a short time.
From here you can move around the screen using the thumbstick (also called the joystick or toggle)
Toggling - moving the thumbstick up or down or left or right - will highlight a different submenu . Initially
the one in the top left-hand corner is highlighted – in this case Map
Clicking – pressing the thumbstick down gently – will bring up the submenu.
Pressing the menu button will bring up a list of options for the menu visible on the screen.
The zoom in/out buttons are only used to alter the image size when a map is shown
Since it is often easiest to navigate around by first returning to the main menu it is important to know that:
1 of 8
back button
on/off + light button
thumbstick or joystick or toggle
zoom out button
zoom in button
menu button
if at any stage you are in a submenu and wish to return to the Main menu just
press the menu button twice [occasionally you may need to press the back button
first]