Garmin eTrex 30 - Navigating to a Geocache; Logging the Attempt

22 eTrex Owner’s Manual
Geocaches
2. Select items to lter.
3. Select an option:
• To apply the lter to the
geocache list, select Search.
• To save the lter, select back.
After it is saved, the lter is
automatically named. You can
access the custom lter from the
geocaches list.
Editing a Custom Geocache
Filter
1. Select Setup > Geocaches > Filter
Setup.
2. Select a lter.
3. Select an item to edit.
Navigating to a Geocache
1. Select Geocaches.
2. Select a geocache.
3. Select Go.
4. Navigate using the map (page 16)
or compass (page 17).
Logging the Attempt
After you have attempted to nd a
geocache, you can log your results.
1. Select Geocaches > menu > Log
Attempt.
2. Select Found, Did Not Find, or
Needs Repair.
3. Select an option:
• To begin navigation to a
geocache nearest you, select
Find Next Closest.
• To end the logging, select Done.