4. Press Enter to return to the Compass Page.
Compass Page Options
Use the options menu to customize the Compass
Page. With the Compass Page open, press the Menu
key. To select an option, highlight it, and press Enter.
Compass Page
Options Menu
The following options are available:
• Sight ‘N Go
—allows you to navigate to an
object within your sight.
• Stop/Resume Navigation
—turns active
navigation for a route or Go To on and off.
• Recalculate
—recalculates the path to a
destination.
• Course or Bearing Pointer
—toggles between
the course pointer and the bearing pointer.
• Data Fields
—allows you to select the number
of data fields that appear on the Compass Page.
• Change Data Fields
—allows you to select the
type of data you want to show in the data fields.
• Calibrate Compass—accesses the compass
Calibration Page.
• Restore Defaults
—returns to factory settings.
Hold the unit
level and turn
slowly.
eTrex Vista Cx Owner’s Manual 51
MAIN PAGES > COMPASS PAGE
To Next Page
Loading...
Need help?
General