Garmin Forerunner 610 - ANT+ Sensors; Pairing Your ANT+ Sensors

18 Forerunner 610 Owner’s Manual
ANT+ Sensors

The Forerunner is compatible with
these ANT+ accessories.
• Heart rate monitor (page 19)
• Foot pod (page 21)
• GSC 10 (page 23)
• Weight Scale (page 23)
• Fitness Equipment (page 24)
For information about purchasing
additional accessories, go to
http://buy.garmin.com.


Before you can pair, you must put
on the heart rate monitor or install
the sensor. See the Forerunner 610
Quick Start Manual or the accessory
instructions.
If your Forerunner does not show
data from the accessory, you may
need to pair the accessory to your
Forerunner. Pairing is the connecting of
ANT+
™
wireless sensors, for example,
connecting your foot pod with a
Forerunner. After you pair the rst
time, your Forerunner automatically
recognizes your foot pod each time it
is activated.
• Make sure that the ANT+ sensor
is compatible with your Garmin
device.
• Bring the Forerunner within range
(3 m) of the ANT+ sensor.
Stay 10 m away from other ANT+
sensors while pairing.
• If is off, select > Setup
> Heart Rate Monitor > HR
Monitor > On > Search for New.
• If is off, select > Setup
> Foot Pod > Foot Pod > On >
Search for New.