Using the Portable Friction
Mount
The portable friction mount comes in
some GLO packages and is available as
an optional accessory�
1
Wipe the mounting surface and the
back of the mount with a wet cloth to
remove dust and debris�
2
Insert the sensor in the mount so the
LEDs face up and the mini-USB port is
accessible�
3
Place on a at surface.
Periodically, you should wipe the surface
and the mount with a wet cloth to remove
dust and debris to help prevent the mount
from sliding�
Registering the Device
• Go to garmin.com/express�
• Keep the original sales receipt, or a
photocopy, in a safe place�
Specications
Case: Rugged, but not water-resistant
Power Supply: Rechargeable lithium-ion
battery, 13 hours (typical use)
Update Rate: 10 Hz, but not all mobile
devices support a 10 Hz update rate�
Vehicle Power Cable* Input Voltage:
12–28 Vdc (*available in some packages)
Operating Temperature: -4°F to 140°F
(-20°C to 60°C)
Charging Temperature: 32°F to 113°F
(0°C to 45°C)
Short-Term (1 month) Storage
Temperature: -4°F to 122°F (-20°C to
50°C)
Long-Term (1 year) Storage
Temperature: -4°F to 68°F (-20°C to
20°C)
Important Safety and Product
Information
WARNING
Installation Warnings
When installing the device in a vehicle,
place the device securely so it does not
obstruct the driver’s view of the road ➊ or
interfere with vehicle operating controls,
such as the steering wheel, foot pedals,
or transmission levers� Do not place
unsecured on the vehicle dashboard
Glo_2_Instructions_print.indd 4 8/1/2018 12:36:52 PM
To Next Page
Loading...
