Garmin GLO - Pairing the Sensor; Bluetooth Pairing Process; Acquiring Satellite Signals

3


Hold to turn on the sensor.

Turn on the other device and enable
the Bluetooth component.
You can refer to the device’s
documentation for specic instructions
about enabling Bluetooth wireless
technology.

Bring the sensor within 30 feet (10
meters) of the mobile device.

Using the mobile device, pair the
sensor with the mobile device.
The sensor PIN is .
The blue LED ashes slowly or is on solid
when the sensor is connected to the other
device.
If the sensor has not established a
Bluetooth connection for several minutes,
it turns off automatically.

 
Rapid ashing
blue
Power on, Bluetooth on
Solid blue Bluetooth connection to the
mobile device established,
satellites not acquired
Slow ashing
blue
Bluetooth connection to the
mobile device established,
satellites acquired

 
Flashing yellow/green Charging
Solid yellow/green Battery is charged
Flashing orange Low battery
Solid orange Faulty battery or
system error


Ensure that the blue LED on the
sensor is slowly ashing blue or
on solid blue, indicating a wireless
connection.

Place the sensor where it has a clear
view of the sky.
Acquiring satellite signals may take a few
minutes.
DRAFT