4
Set your mobile device’s auto-off and
other power management settings
to be suitable for your navigation
experience. Refer to the mobile device’s
documentation for instructions.
Made for iPod
®
touch (4th generation),
iPod touch (3rd generation), iPhone
®
4S,
iPhone 4, iPhone 3GS, iPad
®
2, and iPad.
"Made for iPod, iPhone, iPad” means
that an electronic accessory has been
designed to connect specically to iPod,
iPhone, or iPad, respectively, and has
been certied by the developer to meet
Apple performance standards. Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
The GLO sensor is also compatible with
many Android
®
, Windows
®
or Blackberry
®
smartphones, tablets and notebook
computers.
When using the GLO GPS/GLONASS
sensor with an Android device, you
may need to use an application to allow
the sensor to properly communicate
with the Android system over Bluetooth
technology. The application will allow the
Android system to accept non-system (or
mock) GPS/GLONASS signals.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
: Rugged, but not water-resistant
: Rechargeable lithium-ion
battery, 12 hours (typical use)
: 10 Hz, but not all mobile
devices support a 10 Hz update rate.
:
12–28 Vdc (*available in some packages)
: -4°F to 140°F
(-20°C to 60°C)
: 32°F to 113°F
(0°C to 45°C)
To Next Page
Loading...
