Garmin GMA 35c User Manual

The following les have been archived under the above ARCHIVE FILENAME.
Filename File Contents
Date:
Drafter:
TITLE:
PART NO:
SIZE
A
Scale:
N/A
REV.
Sheet of
REVISIONS
SPECIFICATION
CONTROL
DRAWING
REV. DATE DESCRIPTION ECO NO.
Garmin Ltd. or its subsidiaries
c/o Garmin International, Inc.
1200 E. 151st Street
Olathe, Kansas 66062 U.S.A.
CONFIDENTIAL
This drawing and the specications contained herein are the property of Garmin
Ltd. or its subsidiaries and may not be reproduced or used in whole or in part as
the basis for manufacture or sale of products without written permission .
190-00858-11.pdf
190-00858-11
GMA 35 Installation Manual
H
1 1
JGS
1/20/11
F 9/2/15 Added the GMA 35c 132290
G 10/2/15 Included FCC commetnts 133098
H 3/22/16 Added European Union and Brazil statements 139773
NOTES:
1. DESCRIPTION: Installation Documentation
2. DISTRIBUTION: This document is intended for electronic distribution.
Portable Document Format, contains Installation Manual and Release Specication
release.indd Adobe InDesign Format, Release Specication
Manual Elements FrameMaker, Formatted Files and Figures
*.* Various supporting illustrations, drawings, and artwork.

Garmin GMA 35c Specifications

General

Brand	Garmin
Model	GMA 35c
Category	GPS
Language	English

Summary

1 GENERAL DESCRIPTION

1.1 Introduction

Overview of the manual's purpose and scope for installing the GMA 35.

1.3 Technical Specifications

Covers physical and electrical characteristics of the GMA 35 for installation planning.

1.4 Certification

Details TSO/ETSO compliance and deviations for the GMA 35.

1.6 Operating Instructions

Provides generic operating instructions for TSO purposes and user interface functions.

2 INSTALLATION OVERVIEW

2.2 Installation Materials

Lists the GMA 35 unit part numbers and available accessories.

2.3 Installation Considerations

Discusses mounting, cabling, wiring, and environmental factors for installation.

2.6 Mounting Requirements

Details the GMA 35 mounting surface requirements and unit rack.

2.8 Electrical Noise

Addresses minimizing interference from coupled interference and ground loops.

3 INSTALLATION PROCEDURE

3.4 Electrical Connections

Details making electrical connections using 44-pin D-subminiature connectors.

3.6 GMA 35 Unit Installation

Steps for mounting the GMA 35 unit into its rack and securing it.

3.7 Post Installation Configuration & Checkout

Procedures for verifying failsafe operation, transceivers, and system functions.

4 SYSTEM INTERCONNECTS

4.1 Pin List

Lists pin names and I/O for J3501 and J3502 connectors.

4.5 Audio Inputs and Outputs

Details COM, NAV, Receiver, Telephone, Pilot/Copilot, Passenger audio signals.

4.9 Miscellaneous Configurable I/O

Describes configurable discrete inputs and outputs like PTC, ICS, ISO, COM, PA.