To Next PageTo Next Page
Need help?Do you have a question about the Garmin GPS301 and is the answer not in the manual?
Step-by-step guide for inserting a SIM card into the tracker.
Information on charging the device and battery life expectations.
Important safety warnings and precautions for using the device.
Instructions for powering on the device and initial setup procedures.
How to view the device's current location and street address.
Procedures for making and receiving phone calls using the tracker.
Instructions for sending, receiving, and managing text messages.
Features for recording and replaying the device's travel routes.
Methods for tracking the direction and distance of other GPS devices.
Steps to reset the device to its default factory settings.
Instructions for changing the device's security password.
How to authorize specific phone numbers for device control and access.
Guide to setting the device's local time and time zone.
How to obtain the device's location via a single call or SMS.
Setting up continuous automatic tracking at specified time intervals.
Using LBS for positioning when GPS signals are unavailable.
Obtaining the device's street address by sending an SMS command.
Switching the device into its primary tracking mode.
Activating the device's monitoring or listening function.
How to initiate and answer phone calls with the tracker.
Using the device for two-way voice communication.
Information about the device's data storage capabilities and limits.
How to load tracking data from the device to a platform.
Functionality of the SOS button for emergency alerts and notifications.
Alerts generated when the device loses GPS signal.
Setting up alerts for when the device starts moving.
Creating virtual geographical boundaries for location-based alerts.
Managing multiple geofenced areas for tracking and alerts.
Notifications sent when the device's battery level is low.
Features for enabling power-saving sleep modes for the device.
Forwarding received messages to other specified phone numbers.
How to inquire about service charges or balance information.
Querying the device's current operational status (GSM, GPS, battery).
Retrieving the device's unique International Mobile Equipment Identity number.
Configuring the network protocol settings (TCP or UDP) for data transmission.
Instructions for resetting the device to its default configuration.
Setting up device parameters using a USB connection to a computer.
Configuring GPRS network settings like APN, User ID, password, IP, and port.
Switching the device's communication mode between SMS and GPRS.
Configuring the central monitoring station number for receiving alerts.
General
