EN–4 Heart Rate Monitor Instructions
EN
Caring for the Heart Rate Monitor
NOTE: Unsnap the module before cleaning the
strap.
To prolong the life of your heart rate monitor,
rinse the strap after every use.
Hand wash the strap in cold water with a mild
detergent after every ve uses. Do not put the strap
in a washing machine or a dryer.
Battery Information
WARNING: Do not use a sharp object to remove
user-replaceable batteries. Contact your local waste disposal
department to properly recycle the batteries.
1. Use a small Phillips screwdriver to remove the
four screws on the back of the module.
2. Remove the cover
and replace the
battery with the
positive side facing
up.
NOTE: Be careful not to damage or lose the
O-ring gasket.
3. Replace the back cover and the four screws.
To Next Page
