Garmin OREGON OREGON450 User Manual

6 Oregon Series Owner’s Manual
Basic Navigation
To nd a destination by spelling
the name:
1. On the Main menu, touch Where
To? > All POI.
2. Touch
.
3. Touch characters to spell a part of
the name of your destination.
4. Touch
.
5. Touch the destination.
6. Touch
Go. A colored line indicates
your course.
7. Touch
> Compass.
8. Use the compass to navigate to
your destination as indicated on
page 9.
To navigate to a point on the
map:
1. Touch Map.
2. Touch a point on the map.
3. Touch the information button at
the top of the screen.
Information
button
4. Touch
Go > > Compass.
5. Use the compass to navigate to
your destination as indicated on
page 9.

Garmin OREGON OREGON450 Specifications

General

Display Resolution	240 x 400 pixels
Battery Type	2 AA batteries (not included); NiMH or Lithium recommended
Battery Life	Up to 16 hours
Water Rating	IPX7
High-Sensitivity Receiver	Yes
Interface	USB
Built-in Memory	850 MB
Expandable Memory	microSD card (not included)
Waypoints/Favorites/Locations	1000
Routes	50
Track Log	10, 000 points, 200 saved tracks
Geocaching-Friendly	Yes (Paperless)
Custom Maps Compatible	Yes
Photo Navigation	Yes
Area Calculation	Yes
Picture Viewer	Yes
Preloaded Maps	No
Compass	Yes (tilt-compensated 3-axis)
Barometric Altimeter	Yes
Physical Dimensions	5.8 x 11.4 x 3.5 cm
Wireless Communication	ANT+
Compatibility	Garmin Connect
Display Size	3.0 inches