40
Reference
Marking Your Location
To change the Personal Waypoint symbol:
1. Highlight the Personal Waypoint symbol (immediately to the right of the waypoint name) and
press the ENTER key.
2. Use the ROCKER keypad to select the desired symbol. There are about 50 symbols to choose
from (top left picture). Notice that a written description of the symbol is shown at the top of the
screen.
3. Press the ENTER key when you find the most appropriate symbol.
4. Move the cursor to the OK field (bottom left picture), and press the ENTER key. An alternate
method is to move the cursor to the Go to it field and press the ENTER key to activate the new
personal waypoint as a destination. For more information, refer to “Driving on a Direct Goto” on
page 52.
The ‘Mark Personal Waypoint’ Page will be replaced with the page you were looking at when
you pressed the Menu key. The new Personal Waypoint is now stored in the StreetPilot’s memory.
Waypoint Symbol Page
Marking a Personal Waypoint
To Next Page
Loading...
Need help?
General
