TABLE OF CONTENT
About this manual 3
INFORMATION 3
Warnings 3
Cautions 4
Notes 4
INSTALLATION OF STANDALONE TWIN 5
Remote enable signal 10
Dynamic Load Management (DLM) for Stand Alone TWIN 12
Dynamic Load Management (DLM) for TWIN in a grid 13
RFID reader installation 16
RFID settings for stand alone TWIN 17
RFID settings for TWINs connected in a grid 17
LAN connection via RJ45 19
Dip Switch Information 19
M-Bus information 20
Electrical diagram 21
USER MANUAL 26
Normal use / Charging 26
Resetting/Conditioning of RCCB 26
WEB INTERFACE 27
Reset of wifi settings 27
Connect mobil/tablet/computer to GARO TWIN web interface 27
General information 27
Connect device to Garo TWIN accesspoint 27
List of all different statues 28
Home meny 29
Energy meny 32
Settings 32
Wifi settings 33
Connect TWIN to local wifi network 33
Ethernet settings 34
RFID (option) 35
Outlet options * 36
G-Cloud 36
Charge current settings / DLM 37
Software Updates / Identification 40
Firmware update for TWIN not connected to internet via Wifi or LAN 40
Workingflow RFID with multiple wallboxes 41
Care 41
Technical data 43
2
EN