Garrett Pro-pointer II User Manual


2
FEATURES
 ON/OFF Button
 Pinpointing Tip
 360° Side-Scan Area
 Exclusive Scraping Blade
 LED Flashlight
 Speaker
 Lanyard Attachment Loop
 Sealed Battery Cover







3
Powering On
Press and release the button () while holding the detector away from any
metallic objects. You will hear 2 beeps and the LED () will remain on.
Powering Off
Press and release the button to power off. The unit emits a single beep during
its power down.
LED Light
The white LED will remain illuminated while the unit is on, providing power-
on indication and acting as a flashlight when needed.
Lost Pinpointer Alarm
After 5 minutes of being ON without a button press, the Pro-Pointer II will
begin emitting progressively faster warning chirps for 60 minutes. Press the
power button off and back on to reset.
Auto-Off Feature
After one hour of warning chirps, the Pro-Pointer II will power off automatically.
Scraping Blade
This rugged edge is ideal for sifting through dirt while searching for the target.
The Pro-Pointer II’s 360º-side-scan detection allows the detector to alarm
when the unit is passed in close proximity to a metallic target.

Garrett Pro-pointer II Specifications

Operating Environment

operating temperatures	-35ºF (-37ºC) to 158ºF (70ºC)
operating frequency	12 kHz
environmental rating	IP 66

Battery

battery type	Single 9V (included)
battery life with carbon battery	16 hours
battery life with alkaline battery	30 hours
battery life with rechargeable battery	8 hours

Weight and Dimensions

length	9” (22.9 cm)
thickness	1.5” (3.8 cm) tapered to .875” (2.2 cm)
weight	6.5 oz. (0.2 kg)