Garrett ATX - User Manual

Questions and Answers

W
walkermichelleJul 27, 2025
Why is my Garrett ATX Metal Detector making erratic sounds?
- V
  vbrownJul 27, 2025
  Erratic sounds and noisy operation can occur due to several factors. Excessive electrical interference or metal in floors and walls could be the cause, so try moving outdoors. Ensure the searchcoil is securely connected. Check if you are near power lines, wire fences, fluorescent lights, or other metal detectors causing interference and move away from these sources. Performing a Frequency Scan or reducing your Sensitivity setting may also help.
S
Samantha NelsonAug 3, 2025
How to fix a Garrett Metal Detector that has no power?
- E
  Emily BondAug 3, 2025
  If your Garrett Metal Detector has no power, ensure that the batteries are installed with the correct polarity. If that doesn't work, replace all the old batteries with new ones.
M
Mark Ramirez MDAug 10, 2025
What to do if my Garrett Metal Detector has intermittent target signals?
- C
  Connie GonzalezAug 10, 2025
  If you are experiencing intermittent target signals with your Garrett Metal Detector, try scanning from different directions to better define the signal. Additionally, scraping away some soil to get the coil closer to the target may improve signal consistency.
R
Robert FranklinAug 17, 2025
How to prevent my Garrett ATX Metal Detector from responding when bumping coil against rocks?
- M
  Matthew LewisAug 17, 2025
  To prevent your Garrett Metal Detector from responding when the coil bumps against rocks or other objects, use a coil cover. This will cushion the coil's impact and reduce false signals.

Summary

CONTROLS;QUICK START GUIDE

ATX Controls Overview

Introduces the primary and secondary controls on the ATX detector.

EQUIPMENT SETUP

Searchcoil, Stem, and Armrest Adjustment

Step-by-step guide for adjusting the searchcoil, stem, and armrest for comfortable use.

POWER ON AND BATTERY CHECK

Verifying Battery Charge Level

Explains how to check the battery status upon turning the ATX detector on.

CONTROLS AND FUNCTIONS

DISCRIMINATION SETTINGS

Adjusting Discrimination Levels

Guide to setting discrimination levels to filter out unwanted targets.

SENSITIVITY, THRESHOLD, AND VOLUME

Adjusting Sensitivity and Threshold

How to set sensitivity for depth and threshold for stable audio.

GROUND BALANCE AND TRACKING

Performing Ground Balance

Step-by-step procedure for balancing the detector to ground mineralization.

PINPOINTING TECHNIQUES

Pinpointing Targets with the Button

Detailed guide on using the Pinpoint button to locate targets accurately.

BENCH TESTING PROCEDURES

Test Setup and Basic Target Tests

How to set up and perform basic tests for familiarization.

TIPS AND TECHNIQUES FOR SEARCHING

Handling Mineralized Ground and Hot Rocks

Strategies for dealing with challenging ground conditions like hot rocks and mineralized soil.

WATER USE AND SALTWATER OPERATION

Saltwater Detection Methods

BATTERY REPLACEMENT AND CHARGING

Replacing ATX Batteries

TROUBLESHOOTING AND CODE OF ETHICS

Troubleshooting Common Issues

Solutions for common problems like no power or noisy operation.