Installation and Operation Manual
Argos - Pressure Regulating Valve
MI-23
Elaborado Verificado / Aprovado CSQ Data Revisão Página
JJ
VBL JM 13/02/19 07 24 de 32
4.6.7 LIST OF RECOMMENDED TOOLS
To carry out commissioning set point adjustments and start-up of the GASCAT’s regulators model ARGOS it is
required only the use of a 7/8" combination spanner for setting up the pilot’s adjustment springs.
Valves model URANO are supplied with connectors for ½" ND tubbing in sensor pick-ups, so we still recommend the
use of 19mm and 13/16"combination spanners for fixing sensor pick-ups to the process line.
ND 1 2
1”,2”,3” and 4” 19 mm, 7/8” and 13/16” 1”
To Next Page
Loading...
