GASLAND chef Pro Series - Page 45

www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890
44
Troubleshooting
Error
Code
E0
The main circuit board
can not detect the
temperature sensor
(k-type thermocouple).
The temperature sensor
(k-type thermocouple)
may be damaged and
circuit open.
Replace the
temperature sensor
(k-type thermocou-
ple).
Possibly poor contact
between the temperature
sensor (k-type
thermocouple) and the
connector at the CN2
position of the circuit
board.
Replace the
connector.
The IC at the IC5 position
of the circuit board may be
damaged.
Replace the control
board.
Error Code
Description
Cause for the
Error Code
After Sales
Service
E1
A failure of the oven
door circuit.
The door status detection
switch may be damaged.
Replace the
switch.
The door detection switch
wire group plug and the
connector at the CN1 6
position of the circuit board
may be in poor connection.
Replace the
connector.
Poor contact of switch S1.
Press the port
tightly and reinsert
the switch.
The circuit and
components of the circuit
board may be damaged.
Replace the
circuit board.