GASLAND chef Pro Series - Page 46

www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
45
support@gaslandchef.com
1 (844) 538-7890
Error
Code
Error Code
Description
Cause for the
Error Code
After Sales
Service
E2
The oven heats up
slowly after it starts to
heat up.
The display may be
damaged.
Replace the
circuit board.
E3
After the oven door
was latched, it was
detected that the oven
door was opened.
The door detection switch
S1 is broken.
Replace the switch
at door latch S1
position.
The cricuit board is
broken.
Replace the
circuit board.
The pin wire connector of
the door switch S1 is
loose.
After pressing the
connector, reinsert
the corresponding
pin of the switch.
The power board may be
damaged.
Replace the
circuit board.
Possibly poor contact
between the plug of the
wrie set and the connector
at the CN18 position of the
power board.
Replace the
connector.
Possibly poor contact
between the plug of the
wire set and the connec
tor at the CN2 position of
the display board.
Replace the
connector.
Possibly poor contact
between the wiring
terminal of the wire set
and the connector at the
CN3 position of the circuit
board.
Replace the
connector.
E4
The oven temperature
is too high even not
under Self-clean
function.
Possibly poor contact
between the circuit and
components of the main
control circuit board.
Replace the circuit
board.
The cooling fan is broken.
Replace the
cooling fan.