66
5. When the desired amount of espresso has poured into the cup, press the -button
to stop the pour. The machine will beep twice, indicating it has saved your preferred
pour quantity and exited programming mode.
6. The -button will now pour the saved shot size when pressed, unless reprogrammed,
reset to the default settings, or overridden by the manual function.
PROGRAMMING DOUBLE ESPRESSO
Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to
pour your preferred shot size.
1. Prepare to make a two cup of espresso by following step 3.
2. Place your cup underneath the group head.
3. To begin programming, press the PROGRAM-button once. The machine will beep
once and the program button will begin to flash. This indicates the machine is in
programming mode.
4. Press the -button once. The machine will commence normal pour function, and
the -button surround will begin to flash.
5. When the desired amount of espresso
has poured into the cup, press the
-button to stop the pour. The machine
will beep twice, indicating it has saved
your preferred pour quantity and exited
programming mode.
6. The -button will now pour the
saved shot size when pressed, (unless
reprogrammed, reset to the default set-
tings), or overridden by the manual func-
tion.
RESETTING DEFAULT VOLUMES
To reset the machine to the default one and two shot pour quantities, press and hold the
PROGRAM-button until the machine beeps three times. Release button. This indicates the
machine has returned to its original default settings.
MANUAL FUNCTION
The Manual function over-rides the preset shot size for one time only. It does not save
the shot size like in programming mode. Press and hold the -button or -button.
Release the button once sufficient espresso has flowed into the cup.
To Next Page
Loading...
