www.gateway.com
3
Identifying components
Use this chart to identify the main components of the convertible notebook. For a complete list
of replaceable parts, see “Contents” on pagei.
Preparing your work space
Before performing maintenance on the convertible notebook, make sure that your work space and
the convertible notebook are correctly prepared.
• Wear a grounding (ESD) wrist strap, and use a grounded or dissipative work mat.
• Use a stable and strong table, and make sure that the table top is large enough to hold each
component as you remove it.
• Use bright lighting to make part identification easier.
• Keep your work surface free from clutter and dust that may damage components.
• Use a magnetized screwdriver for removing screws.
Processor
(see
page 14
)
Cooling assembly
(see
page 11
)
LCD panel assembly
(see
page 40
)
Keyboard cover
(see
page 27
)
Keyboard
(see
page 28
)
Palm rest assembly
(see
page 50
)
System board
(see
page 58
)
To Next Page
Loading...
